It’s very important to check the power tools before you use it.
1. Before using the tool, a full-time electrician should check whether the wiring is correct to prevent accidents caused by the wrong connection of the neutral line and the phase line.
2. Before using the tools that have been left unused or damp for a long time, an electrician should measure whether the insulation resistance meets the requirements.
3. The flexible cable or cord that comes with the tool must not be connected long. When the power source is far away from the work site, a mobile electric box should be used to solve it.
4. The original plug of the tool must not be removed or changed at will, and it is strictly forbidden to directly insert the wire of the wire into the socket without a plug.
5. If the tool shell is found to be broken, the handle should be stopped and replaced.
6. Non-full-time personnel shall not disassemble and repair tools without authorization.
7. The rotating parts of the tool should have protective devices.
8. Operators wear insulating protective equipment as required.
9. A leakage protector must be installed at the power source.
Post time: Feb-24-2022